 |
| Model C-777 |
| The
Model No. C-777 is a high
Quality low cost chlorinator of
the solution feed, vacuum type.
Proven design, rugged
construction and use of best
available materials assured
precise gas feeding, low
maintenance, dependable
operation and long life. The
chlorinator mounts directly on
the cylinder valve by means of
yoke clamp connection. The
ejector is designed for low
pressure operation and may be
mounted directly in the pipe
line.
more... |
|
|
|
 |
| Ejector E-777 |
| The ejector creates a vacuum in the system by virtue of water under pressure passing through its venture and opening the check valve. This spring opposed the check valve prevent water entering the vacuum gas pipe work on shut down of the system. The gas entering the ejector under vacuum via the check valve is vigorously mixed with the incoming water flow prior to injection in to the water to be treated.
more... |
|
|
|
 |
| Model C-731 |
Chloro Tech Model C-731 is the advance technology Chlorinator designed to feed chlorine gas at a controlled rate. The flow rate of gas is maintained by constant positive acting spring-opposed diaphragm regulators.
more... |
|
|
|
 |
| Ejector E-731 |
| The ejector creates a vacuum in the system by virtue of water under pressure passing through its venture and opening the check valve. This spring opposed the check valve prevent water entering the vacuum gas pipe work on shut down of the system. The gas entering the ejector under vacuum via the check valve is vigorously mixed with the incoming water flow prior to injection in to the water to be treated.
more... |
|
|
|
 |
| Remote
Vacuum Regulator |
Remote wall panel mounted Vacuum
regulator, Vacuum is controlled
by a spring opposed diaphragm
via which via the throttling
action of the inlet connected
valve, reduces the gas from a
varying supply pressure to
constantly regulated vacuum for
safe transport to the point of
application.
more... |
|
|
|
 |
| VACUUM
TYPE CHLORINATOR MODEL MARK-I |
| The New
model MK- I Chlorinator is
manually adjusted gas type.
Vacuum operated. Solution feed
instrument designed to provide a
continues & constant measured
quantity of gas while in
operation. It is suitable for
use with chlorine. Sulphur
dioxide or ammonia gas.
Intermittent “Stop-Start”.
Control or automatic “Shut-Off”.
Can be achieved by interruption
of the motive water supply.
more... |
|
|
| |
 |
| Ejector E-730 |
| The ejector creates a vacuum in the system by virtue of water under pressure passing through its venture and opening the check valve. This spring opposed the check valve prevent water entering the vacuum gas pipe work on shut down of the system. The gas entering the ejector under vacuum via the check valve is vigorously mixed with the incoming water flow prior to injection in to the water to be treated.
more... |
|
|
| |
 |
| RVR R-10 |
REMOTE VACUUM REGULATOR FOR MK - I CHLORINATOR
more... |
|
|
| |
|
|
| Model C-730 |
Chloro Tech Type 730 Chlorinator is a high quality, low cost solution feed, vacuum unit.
Proven design, rugged construction and use of best available materials assure precise gas feeding, low maintenance, dependable operation and long life.
more... |
|
|
| |
 |
| Flow Proposnet Valve |
These instructions apply to the wall and panel mounted Series 1410 Automatic gas control vale. Component instruction manuals and supplemental data are referenced where applicable. Maximum capacity of the valve is related to:
more... |
|
|
| |
 |
| Electrical Drum Change Over |
Electrical Regulating Valve
and Automatic Drum Change Over Device
more... |
|
|
| |
 |
| Mechanical Vacuum Change Over |
The vacuum change – over device U 189-010 ensures a continuous gas supply for gas dosing systems by changing the gas supply over in time from the empty supply battery to stand by battery.
more... |
|
|
| |
 |
| COPPER TUBE (CO/C1) |
MOC of Copper Tube as per ASTM – B - 88
Flexible connector, Lenth 1.5 mtr long
NB 5/16” 16 SWG cadium plated
Adoptor 5/8” BSP thread with nut
more... |
|
|
| |
 |
| ROLLER SUPPORT (RLS - 65) |
RSL – 65 Drum Roller tunnion fabricated from steel , epoxy coated to resist corrosion, Roller are cadmium plated and equipped with bronze bushing for ease of drum rotation. Frame have holes in end to attached to floor via anchor bolts or lag anchors. One set of two tunnions are required for each container.
more... |
|
|
| |
 |
| Auxillary Ton Container Valve |
Cylinder/ton Isolation Valve
With Mounting Yoke Assemble
more... |
|
|
| |
